Welcome to the website of Dongguan Likalong Synthetic Material Co., Ltd.Provide you with high-quality Teflo nonstick coating!
CN
Likalong Integrity Communication
Likalong Paint

Teflo coating manufacturer

Select high quality raw materials

Professional quality, FDA certification, SGS standard

Tel:

+86-0769 8504 0985

Mr. Li:

+86-135 9272 6948
4Characteristic
Your location: Home ->  Characteristic
Series Model Colour Brief and effect Baking temperature Baking time Scope of application
Teflo
coating
200 Transparent Full gloss finish 380°C About 50 minutes 01. Textile guide roller
02. Textile drying cylinder
03. Wheel mold
04. Rubber mold
05. Sole mold
06, heat exchanger
07、Tape guide roller
08. Rubber stopper mould
09. Copier roller
10. Industrial washing machines, drums
11. Various chemical equipment (reaction furnace, stirring paddle, mixing barrel, box, valve, etc.)
204 Green, black, gray Ordinary gloss finish
208 Green, black, gray Glossy finish
214 Green, black, gray Matte finish
7799 Red Primer additives
314 (primer) Green, black, gray Primer (two-component) 200°C About 25 minutes
316 (primer) Green, black, gray Primer (single component)
Room temperature self-drying paint 500 Transparent, milky white, green Natural curing (no baking) Normal temperature (about 45 hours of self-drying time) Various types of rubber, plastic metal products, molds, etc.
Nano double-layer coating (340°C series) Primer 518 Topcoat 519 Black Bright light 340°C About 30 minutes (need to preheat spraying, the temperature is about 50 °C) Aluminum, stainless steel, ceramic cold plate iron sheet cast iron, etc.; the ratio of topcoat to additives is 25:1
Nano nonstick coating (280°C series) 2600 enhanced series Back Bright light 280°C About 30 minutes Aluminum, stainless steel, ceramic cold plate iron sheet cast iron, etc.; paint and spray gun should not be wetted
Nano nonstick coating (280°C series) 128 series Various colors Bright, matte 280°C About 30 minutes Aluminum, stainless steel, ceramic cold plate iron sheet cast iron, etc.; paint and spray gun should not be wetted
Nano coating (280°C series) Three-component coating Various colors Bright, matte 280°C It takes about 30 minutes to spray money and need to be preheated for 9H maturation Aluminum, stainless steel, ceramic cold plate iron sheet cast iron, etc.; various cooking utensils, etc.
Nano nonstick coating (320°C series) 8000 nm series Transparent
(YB-8000)
Gray
(YB-8001)
Champagne
(YB-8002)
Silver
(YB-8003)
Green
(YB-8004)
Black
(YB-8006)
Bright, matte 320°C (slowly heat up) About 30 minutes (need to preheat spraying, temperature is about 60°C) Aluminum, stainless steel, ceramic cold plate iron sheet cast iron, etc.; paint and spray gun should not be wetted
Nano nonstick coating (380°C series) 138 series Various colors Bright, matte 380°C About 30 minutes Aluminum, stainless steel, ceramic cold plate iron sheet cast iron, etc.; coatings and spray guns should not be wetted with water, and the base metal should reach 50°C-60°C
Multifunctional water-based nonstick coating Primer 8701 Black Primer 120°C About 25 minutes Aluminum, stainless steel, ceramic cold plate iron sheet cast iron, etc.; primer; cold spray finish
Topcoat 6902 Black Topcoat 380°C About 50 minutes

Note: 1. Before use, be sure to roll or shake the container to make the product even;

2. Please store the paint in a dry place (the temperature is about 5-29°C), and be careful to prevent freezing;

  • The above data is for your reference. If you have any questions, please contact us.
  • Address: Huaguoshan New District, Xinlian Community, Humen Town, Dongguan City, Guangdong Province, China

    Phone: +86-0769-85040985/+86-13592726948

    Hotline

    +86-0769-85040985

    Mr. Li

    +86-135-9272-6948

    Fax

    +86-0769-85193535

    Email

    sheng877@163.com

    Mobile website

    Mobile website
    Dongguan Likalong Synthetic Material Co., Ltd. All rights reserved © Copyright 2020  [ Backstage ] Technical Support:Dongguan website construction
    *Some webpage materials on this site come from the Internet, please inform us if there is any infringement, and we will delete it within 24 hours*